Studer Xcom-GSM / LAN
9th October, 2023SMA Sunny boy
9th October, 2023BSP battery monitor studer
299,00€ - 315,00€
Studer BSP battery monitor for Xtender and VarioTrack / VarioString systems. Compatible with 12/24/48 V battery parks, to be coupled with an RCC-02/03 control interface for data visualization and configuration.
Studer BSP Battery monitor :
The most important thing for the safe and efficient operation of a system with batteries is the state of their charge.
The Studer BSP offers highly accurate measurement and an extremely efficient algorithm that calculates the state of charge in the most exact way. (for Xtender, VarioTrack and VarioString systems)
Thus the BSP controls the devices used with the inverters / chargers of the Xtender range.
The BSP is equipped with a voltage measurement for batteries of 12, 24 and 48 V nominal as well as a current measurement by resistive shunt.
Via the RCC-02 / -03 remote control, it is possible to fully configure the BSP as well as the display of the values measured by it.
The RCC-02/03 remote control allows display, data logging, graphical presentation of the load status history and settings.
In addition, 17 different values can be displayed, for example:
- State of charge
- Tension
- Current
- Remaining time
- Energy metering
- Battery temperature
Dimensions H x L x W: 110.5 x 75 x 26 mm
Swiss made
http://www.studer-innotec.com/fr/accessoires/serie-variotrack/moniteur-de-batterie-bsp-769
Shunt capacity (A) | 500, 1200 |
---|