Smartsolar MPPT Victron 75/15 - 100/20
9th October, 2023BYD LVL 15.4 kWh battery
9th October, 2023Victron EasySolar-II GX 48V / 3000VA / 35A MPPT 250/70
2.150,00€
The all-in-one solution for solar energy Victron EasySolar-II GX integrating:
- Multiplus-II converter / charger
- SmartSolar MPPT-Tr solar charge controller
- As well as a GX device with a 2 x 16 character display.
Manufacturer's website Victron Victron EsaySolar-II GX Inverter
The all-in-one solution for solar energy Victron EasySolar-II GX Inverter:
The Victron EasySolar-II GX 48V / 3000VA / 35A MPPT 250/70 Inverter incorporates the following components:
- Multiplus-II converter / charger
- SmartSolar MPPT-Tr solar charge controller
- As well as a GX device with a 2 x 16 character display.
These components are supplied pre-wired and integrated in a single housing.
Thus most installations are greatly simplified, and the saving of time and money is considerable.
Screen and Wi-Fi The screen reads the parameters of the solar charge controller, the battery and the converter.
The same parameters are accessible from a smartphone or a device with WiFi connection.
Finally, Wi-Fi is also used to configure the system and modify the parameters.
Solar charge controller
The DC output of the SmartSolar MPPT is wired in parallel with the DC connection of the MultiPlus-II converter / charger.
Finally, the MultiPlus-II on / off mechanism also controls the SmartSolar MPPT.
GX device
The integrated GX device includes:
- A VE-Can interface, the interface is used to connect Victron VE-Can devices (such as VE-Can MPPTs), or the port is reconfigured using the remote console for use with a Li-battery. CAN-bus ion compatible,
- As well as the USB port,
- And an Ethernet port,
- And finally, the VE-Direct port, this GX device controls the MultiPlus-II with a VE-Bus connection and the SmartSolar MPPT with a VE.Direct connection.
Technical specifications
CONVERTER / CHARGER | |
PowerControl and PowerAssist | Yes |
Transfer switch | A 32 |
Maximum AC input current | A 32 |
Auxiliary output | Yes (32 A) |
CONVERTER | |
Supply voltage range | 38 - 66 V |
AC output | Output voltage: 230VAC +/- 2% Frequency: 50Hz +/- 0.1% |
Continuous output power at 25 ° C | 3000VA / 2400W |
Continuous output power at 40 ° C | 2200 W |
Continuous output power at 65 ° C | 1700 W |
Peak power | 5500 W |
Max efficiency | 95% |
Zero charge power | 11 W |
Zero load power in search mode | 7 W |
Zero load power in search mode | 2 W |
MAGAZINE | |
AC input | Supply voltage range: 187-265 V AC Input frequency: 45-65 Hz |
"Absorption" charge voltage | 57.6 V |
Charging voltage "Float" | 55.2 V |
Standby | 52.8 V |
Service battery charge current | A 35 |
Battery temperature sensor | Yes |
Programmable relay | Yes |
Protection | a - g |
VE.Bus communication port | For parallel or three-phase operation, remote control and system integration |
Com port. universal | Yes, 2x |
SOLAR CHARGE CONTROLLER | |
Max output current | A 70 |
Max PV power | 4000 W |
Max open circuit PV voltage | 250 V |
Max efficiency | 98% |
Self-consumption | 20 mA |
Charge voltage "absorption" | 57.6 V |
Charging voltage "Float" | 55.2 V |
Protection | a - g |
COMMON FEATURES | |
Interfaces | VE.Can, USB, Ethernet, VE.Direct, WiFi |
Remote on / off switch | Yes |
Operating temperature range | -40 ° C to + 65 ° C (fan cooling) |
Humidity (non-condensing) | max 95% |