Zenaji Aeon 1.93 KwH
9th October, 2023Jinko Solar Tiger Neo
9th October, 2023Three-phase pre-wired autonomous solar cabinet (Victron)
- Pre-wired three-phase autonomous solar cabinet designed tailor-made
- Available in 9/15/24/30 kVA in three phases.
- Validated by the Consuel
- Safe: integrates all DC/AC safety elements (lightning arresters, circuit breakers, etc.)
- Complete : Includes all the equipment necessary for stable operation (inverter, controller, connectors)
- Pre-configured depending on your use (isolated site, hybrid), for easy installation.
- Makes installation easy (safe installation, no wiring/handling error).
- Pre-tested in workshop before shipment.Compatible batteries : Nickel-Iron, Pylontech, BYD, Zenaji Aeon, etc…
Pre-wired standalone solar cabinet three-phase:
SUNCONNECT autonomous solar cabinets are pre-wired autonomous solar systems, available in a three-phase version. They have the advantage of being pre-wired to save you from complex and tedious wiring, which is sometimes a source of errors. They are assembled in France by our partner Kamase. This makes installation much easier, allowing the uninitiated to have very little intervention to do when connecting their system.
It is designed for hybrid solar use, i.e. where your supplier's network is present. Depending on the energy produced by the solar panels, as well as that of the battery (s) present, it will supplement the system's contribution if it does not manage to cover all the consumption needs of your place. dwelling.
Load consumption is managed automatically and optimized, in the following order of priority:
1. Consumption from solar panels
2. Consumption from the battery (s)
3. Consumption from the network
Thus, the customer is guaranteed to consume as a priority the renewable energy produced by his solar panels or stored in the battery, and lastly from the network. This will therefore be called upon in the following two scenarios:
- Battery too weakly charged (programmable threshold).
- Inrush power too high (in which case the power difference will be requested from the network).
1. Operating diagram of a SUNCONNECT three-phase pre-wired autonomous solar cabinet: self-consumption scenario with EDF during the day:
2. Operating diagram of a three-phase autonomous SUNCONNECT system, autarky scenario, EDF cut:
* As an option, the customer can also feed the surplus solar energy produced by the system back to ENEDIS, subject to having a CAE and a feed-in tariff (EDF OA) and having entrusted the installation of its solar panels and the system to a Quali'PV / RGE installer.
Likewise, in the event of a power failure, the system is automatically activated and resumes power to the connected loads. This transfer is so fast (less than 20 milliseconds) that the operation of the loads will not be disturbed in any way. (UPS function). Everything is automated, you do not need to intervene on the board. The panels and / or the batteries will continue to supply the loads in your home.
Pre-wired cabinets are made up of the following elements:
- MultiPlus-II 48, in 3, 5, 8 and 10KVA (configured in three-phase, i.e. 3x units, one per phase)
. A solar cabinet pre-wired according to the rules of the art, no compromise is made on the quality or safety of the components used :
4. Video presentation of a system in operation with a US5000 rack and a three-phase SUNCONNECT 30KVA system: