Three-phase pre-wired autonomous solar cabinet (Victron)
9th October, 2023Zenaji Eternity
9th October, 2023SUNCONNECT pre-wired stand-alone solar system
3.200,00€ - 8.299,00€
- Your pre-wired and tailor-made autonomous solar system.
- Assembly in France, Consuel standards.
- Isolated or hybrid site compatible (addition of a source inverter)
- Secure: integrates all security elements Asked Consuel standards
- You can use up to 10W of solar panels.
- Full : Includes all the necessary equipment.
- Pre-configured depending on your use (isolated site, hybrid)
- Pre-tested in workshop before shipment.
- Full 5-year warranty on all components.
- Simplified installation (no wiring errors, saving time).
- Compatible batteries : Nickel-Iron, Pylontech, BYD, Zenaji Aeon, etc…
SUNCONNECT pre-wired autonomous solar systems (Victron version):
Forget complicated-to-assemble autonomous solar kits! Our pre-wired Victron stand-alone solar systems have the advantage of being pre-wired and assembled In France. Intended for solar installations on an isolated site or in hybrid use, they allow greatly facilitated installation. In addition, this allows the uninitiated to have very little intervention to do for the final connections of their system. This guarantees a secure installation, with a guaranteed result.
SUNCONNECT panels can be used in several scenarios: on an isolated site with a generator, or in hybrid operation with EDF:
First of all, what makes SUNCONNECT panels unique is their flexibility; they are compatible both for use on isolated sites, but also in hybrid use. VSi.e. where your provider's network is present. Note that this can be adjusted when you order, as long as you tell us what the final application of your plate will be;
Depending on the energy produced by the solar panels, as well as that of the batteries present, the SUNCONNECT system will complete the contribution of the system. To the extent of course if it does not manage to cover all of the consumption needs of your place of residence.
Likewise, SUNCONNECT stand-alone solar systems can operate natively on an isolated site, in which case they will connect to a generator.
Each SUNCONNECT pre-wired solar system is made to order in France, and can be completely personalized.
In addition, each pre-wired Victron solar kit is designed and assembled in France, in strict compliance with the highest quality standards. At first glance, each “solar kit” may look similar, but our solutions are different. As highlighted by the quality of our AC/DC protection electrical boxes. In addition, we test each turntable before shipping. We make the following adjustments so that the customer has a plug n play solar kit:
– Victron hardware firmware flash
-Programming of devices (Multiplus, RS, Cerbo) according to your use (isolated or hybrid site, generator or not, etc.)
-Electrical continuity test
-Ignition of devices via a Pylontech test battery (48V).
Lot of SUNCONNECT boards ready for shipment, currently being programmed
(via Pylontech battery in the center)
With a pre-wired SUNCONNECT autonomous solar system, you are opting for an installation designed and wired according to the rules of the art!
SUNCONNECT systems are based on our expertise in the design of hybrid solar systems with batteries and in the assembly of electrical elements. We put emphasis on finishing details and the safety aspect. By differentiating ourselves from other competitors who only put in the minimum, in order to limit costs.
Wiring carried out according to the rules of the art, industrial quality components
(Schneider / SOCOMEC / Phoenix Contact)
Optimize your self-consumption and secure your electricity supply in the event of a breakdown thanks to the SUNCONNECT autonomous solar system:
In addition, the consumption of your home will be supplied as a priority according to the following energy arbitration:
1. Consumption from solar panels
2. Consumption from the battery(ies)
3. Consumption from the EDF network
Thus, the customer is assured of consuming renewable energy produced from their solar panels or stored in the battery as a priority, and lastly from the network. This will therefore be requested in the following two scenarios:
- Battery charged too low (programmable threshold).
– Inrush power too high (in which case the power difference will be requested from the network).
Standard function diagram: presence of the EDF network, priority to self-consumption, storage of the surplus produced by the solar panels towards the batteries :
* As an option, the customer can also feed the surplus solar energy produced by the system back to ENEDIS, subject to having a CAE and a feed-in tariff (EDF OA) and having entrusted the installation of its solar panels and the system to a Quali'PV / RGE installer.
When a power outage occurs in your home, the SUNCONNECT pre-wired autonomous solar system automatically activates and resumes power supply to the connected loads. This transfer is so fast (less than 10 milliseconds) that the operation of the loads will not be disrupted in any way. (UPS function). Everything is automated, you don't need to intervene on the board. The panels and/or batteries will continue to power the loads in your home.
For more information, see our guide to solar autonomy:
Function diagram WITHOUT network: the pre-wired SUNCONNECT solar system immediately switches to emergency mode (10ms), creating its mini-network, and continues to power your home, now self-sufficient.
Video presentation of the protections & cutoffs integrated into our autonomous solar systems:
Weight | ND |
---|---|
Length | ND |
Engime | 2kVA, 3kVA, 5kVA, 8kVA, 10kVA |