TESVOLT TPS HV 80-E battery
12th October, 2023DEYE BOS-G battery
23th October, 2023DEYE 48V single-phase hybrid inverter
1.299,00€ - 2.100,00€
- Fully integrated hybrid inverter.
- Operation without battery possible
- Colorful touchscreen LCD, waterproof (IP65).
- Requires a Type B differential circuit breaker (no galvanic isolation).
- Guarantee of 10 years as standard.
- Compatible with any type of battery: Gel / AGM / Lithium type Pylontech or other (BMS communication included)
- Parallel connection possible up to 16 inverters
- Back-up time of 4ms.
- High overall efficiency (> 95%).
- Weight: 20 Kg, dimensions: 330x580x232mm.
- Numerous integrated protections (reverse polarity, lightning, etc.).
DEYE SUN-5K-SG03LP1-EU single-phase hybrid inverter: one of the best-selling in the world!
The DEYE SUN-5K-SG03LP1-EU hybrid inverter, single-phase, is suitable for hybrid residential needs, and to a lesser extent in isolated sites (be careful of overloads).
In summary, it optimizes the percentage of self-consumption of solar energy while increasing your energy autonomy.
During the day, the photovoltaic system produces electricity which is primarily intended to power the loads. Subsequently, the excess energy is directed to the battery via the DEYE SUN 5K. Finally, the stored energy can be redistributed according to the needs of the loads. It is equipped with an RS485/CAN port facilitating communication with lithium-ion type batteries (Pylontech for example).
SUN-5K-SG03LP1-EU fully integrated IP65 inverter, 2x MPPT trackers, for easy and streamlined installation:
The DEYE SUN-5K hybrid inverter is equipped with two MPPT trackers that can go up to 500v and 13 amps, allowing up to 3250w of solar panels to be connected to each one. By operating both trackers at their maximum capacity, you can use up to 6500 Wp of solar panels, to meet consumption needs and recharge the batteries. These will recharge with a maximum current of 90A (for 3.6K version) or 120A (for 5K version).
Thanks to the input capacity of 13 amps in short circuit current (PV MPPT side), it is possible to use high power solar panels. In other words, all current solar panels are compatible. The DEYE is flexible and also offers the option of plugging a string of microinverters or a grid inverter (such as a Fronius or SMA) into its input to boost the solar charging. This can be done via the gen port, which will be configured specifically for the micro inverter or grid inverter.
Configuration system via simple and comprehensive LCD screen:
The entire Deye hybrid inverter range is equipped with Wi-Fi functionality, accessible via the toll-free Solarman Smart app, available on Google Play and the App Store for smartphones and PCs. It is one of the most comprehensive applications on the market, allowing you to manage all operational aspects of the hybrid inverter, such as battery charge level, energy production and consumption, annual daily statistics. , while also offering the possibility of remote control and configuration of the inverter.
The interface accessible via the touch screen of the DEYE SUN-5K-SG03LP1-EU is very complete, and allows visualization of monthly and daily production statistics, as well as energy imported from EDF:
Substantial off-grid power, developing up to 5500W continuously:
The output power of the DEYE hybrid inverter is quite substantial, even in the absence of EDF. Indeed, with a power of 3690W continuously (on the 3.6 model), and up to 5500W continuously on the 5K model, this comfortably covers most residential hybrid installations. Note that the overload capacity of the inverter is limited to 2x its continuous power, for 10 seconds. This may seem like a lot, but in an isolated site, certain configurations require more overload power. This is a factor to take into account when using it on an isolated site, which we also advise against. Indeed, DEYE type inverters are without toroidal transformers, and are not robust enough to support isolated site use over the long term (> 10 years).
In terms of transfer capacity, they are slightly lower than a Victron Multiplus-II 5000VA (50A) but still remain very correct, at 35 and 40A respectively for the 3 and the SUN-5K.
DEYE SUN-5K, compatible with 48V lithium battery technologies and unmanaged batteries:
The DEYE SUN-5K inverter is compatible with almost all 48V battery technologies. An integrated CAN-BMS interface ensures a plug and play solution with communicating lithium batteries.
Independent test carried out by Guillaume PITON (la Watterie) on the DEYE hybrid inverter:
The DEYE SUN-5K-SG03LP1-EU inverter integrates the most advanced standard protections on the market:
The DEYE hybrid inverter impresses with the protection features integrated into the inverter. The latter is equipped with the following standard protections:
- Protection against lightning on the DC (photovoltaic) and AC side, via Type 2 surge arresters.
- Protection against islanding (UTE decoupling certificate).
- Solar side reverse polarity protection.
- RCMU (AC side leakage current detection device).
- Protection against short-circuiting of AC outputs.
It should be noted, however, that at least redundancy of surge arresters will be required on the AC side and the DC side. In fact, the surge protectors are integrated into the motherboard of the inverter and are not replaceable.
Model | SUN-3.6K, SUN-5K, SUN 6K, SUN-8K |
---|
Compatible batteries list
Deye-Approved-Battery-listDY-LV48-00011UTE certificate
Ning_SUN-xK-SG03LP1-EU_UNBED_C15-712-3_frz_U20-0323You may also like ...
-
Jinko Solar Tiger Neo
138,00€